Click image to view full size image
Product information
Lever shears are mainly used for cutting thin plates with small diameter round ribs.
The lever shears mainly include transmission system, slide block (tool holder), bed (frame), compression mechanism and other auxiliary devices. It has the advantages of good rigidity, high efficiency, less failure, etc., and has been widely used.
The machine has the advantages of simple structure, convenient manufacture, short production cycle and low cost. Easy to operate, small vibration, stable work, low noise, long tool life.
Item No. |
HR200101 |
HR200102 |
HR200103 |
HR200104 |
HR200105 |
HR200106 |
|
Model |
HS-5 |
HS-6 |
HS-8 |
HS-10 |
HS-12 |
HSG-8 |
|
Blade length |
5" |
6" |
8" |
10" |
12" |
8" |
|
|
Capacity(mm) (mild steel) |
Sheet steel |
6.0 |
6.0 |
6.0 |
6.0 |
6.0 |
6.0 |
Flat steel |
70×6 |
70×6 |
70×6 |
70×6 |
70×6 |
70×6 |
|
Round steel |
11 |
11 |
13 |
13 |
13 |
13 |
|
Packing size（cm） |
33×16×33 |
33×16×33 |
50×16×45 |
74×16×44 |
74×16×44 |
50×16×45 |
|
N.W./G.W（kg） |
10/12 |
11/13 |
17/19 |
21/23 |
26/28 |
17/19 |
|
http://www.tzhrmachine.com/